美國泰克TCPA300電流放大器的詳細介紹：m.ooo71.com
Features & Benefits
- AC/DC Measurement Capabilities
- DC – 100 MHz, Current Probe Amplifier （TCPA300） uses:
- DC – 100 MHz, 30 A DC （TCP312）
- DC – 50 MHz, 50 A DC （TCP305）
- DC – 15 MHz, 150 A DC （TCP303）
- DC – 50 MHz, Current Probe Amplifier （TCPA400） Uses:
- DC – 2 MHz, 750*1 A DC （TCP404XL） （500 A DC Continuous）
- Automatic Scaling and Units*2 – Oscilloscope On-screen Readout of Magnitude and Amps reduces Measurement Errors with No More Hand Calculations
- AC/DC Input Coupling
- Low Insertion Impedance reduces Device Under Test Loading
- Split-core Construction allows Easy Circuit Connection
- Status Indicators provide Visual Operating Status and Notification of Potential Error Conditions – Degauss, Probe Open, Overload, Not Terminated into 50 ?, Noncompatible Probe Type
- Lower DC Drift and Noise allows Improved Low-level Current Measurements
- Certified for use in U.S., Canada, and Europe. Complies with applicable IEC Standards.
Applications
- Development and Analysis Solutions for Designers, Installers, and Service Personnel in ecomm, Data Comm, Computer, and Semiconductor Power Electronics Environments for:
- Power Supplies （Switching and Linear）
- Semiconductor Devices （SCRs, IGBTs, MOSFETs, CMOS, BJTs）
- Power Inverters/Converters
- Electronic Ballasts
- Industrial/Consumer Electronics
- Communications （Phone, Salite, Relay Stations）
- Motor Drives
- Transportation Systems （Electronic Vehicles, Electric Trains, Locomotives, Avionics）
Increased Performance and Simplicity
The TCP300 and TCP400 Series AC/DC current measurement family is a highly advanced current measurement system for today's current measurement needs. When connected to Tektronix oscilloscopes with TEKPROBE Level II, TekConnect （w/ TCA-BNC）, or TekVPI （w/ TPA-BNC） interfaces, current measurements and calculations are simple and easy.
*1 Derated with duty cycle.
*2 Requires a TDS TEKPROBE oscilloscope or a TekConnect oscilloscope with TCA-BNC.
Meets Today's AC/DC Current Measurement Applications
The TCPA300 amplifier, when used with TCP312, TCP305, or TCP303 probes, provides a wide range of current measurement capability and spans the gap between low-level milliamp measurements to very high current levels. These three probes provide current measurement capabilities of 30 A, 50 A, and 150 A DC continuous. For even higher current levels, the TCPA400 amplifier with the TCP404XL current probe measures 500 A DC continuous and 750 A DC continuous, derated with duty cycle.
Higher frequency performance is available with the TCP312 w/TCPA300 providing ≥100 MHz bandwidth and a maximum current of 30 A DC.
Measurement Errors and Manual Calculations are Now a Thing of the Past
With this new series of current measurement tools, automatic control and on-screen scaling and units is provided for users of Tektronix TDS3000, TDS500, TDS600, TDS700, TDS5000, TDS6000, and TDS7000B Series oscilloscope systems （the DPO3000, MDO/MSO/DPO4000, MSO/DPO5000, and DPO7000 Series oscilloscopes, the TPA-BNC adapter is required）.
The TCP300/TCP400 current measurement systems seamlessly integrate with your TDS Series oscilloscope.
Even non-TEKPROBE systems can use the TCPA300/400 Series to make proper current measurements by simply multiplying the measured output voltage on the oscilloscope by the TCPA300/400 Series range setting.
